Simulation of Pneumatic Pressure Transducer Reliability on the Transfer Function of Bellow
Abstract
Mathematical model of pneumatic pressure transducer was developed to simulate the reliability of the transfer function on a bellow system, having in mind that pneumatic systems are highly non-linear by their nature. Reliability and compliance of a pneumatic pressure transducer in the transfer function of a bellow can be influenced by the geometry of bellow, the force transduced into pressure per unit area, the characteristics of the gain and the influence of the restrictor transduce signal. Mathematical tools and language of separation of variables, law of partial fraction, Laplace transformation and computer language of excel was applied in simulating the pressure transducer characteristics of a bellow in terms of the reliability of the transfer function. Theoretical results are presented to demonstrate the effectiveness of this pressure transduce and simulated data obtained was validated as shown in this research work.
Downloads
Literaturhinweise
Ukpaka, C. P., & Ndor, V. M. (2013). The flow characteristics of fluid (hexane) and its effectiveness on orifice plate using pneumatic proportional control. Journal of Engineering and Technology Research, 5(5), 112–121.
Ukpaka, C. P. (2011). Application of algorithm of Runge-Kutta method in microbial entrained oil recovery in oil wells of Niger Delta in Nigeria. International Journal of Current Research, 3(12), 126–132.
Ukpaka, C. P., Amadi, S. A., & Orji, G. A. (2011). Design and development of mathematical model to monitor and predict the characteristic of bellow in fluid systems. Global Journal of Engineering and Technology, 4(4), 441–448.
Ukpaka, C. P., Ahuchogu, I. G., & Odharo, J. (2011a). Modeling the rate of biocorrosion and the effects of redox-reaction of metals in water environment. Journal of Engineering and Technology Research, 3(13), 371–380.
Ukpaka, C. P. (2014). Evaluation of pneumatic proportional control to predict and monitor constant area variable pressure drop using different fluids in orifice plate. International Journal of Novel Research in Engineering & Pharmaceutical Sciences, 1(5), 8–14.
Ukpaka, C. P. (2015). Modelling the period impressed voltage on crude oil distillation using proportional controller mechanism. International Journal of Novel Research in Engineering & Pharmaceutical Sciences, 2(4), 24–42.
Ukpaka, C. P., & Ogoni, H. A. (2015). Application of MATLAB model on evaluating the dynamics and control of bioreactor with sludge recycle. International Journal of Novel Research in Engineering & Pharmaceutical Sciences, 2(3), 49–61.
Ukpaka, C. P. (2015a). Model to monitor, predict and control impulse input response of distillate and reflux ratio of a distillation column. Applied Science Report, 13(1), 29–42.
Ukpaka, C. P. (2015b). Prediction and control of pulse input response of distillate and reflux ratio of a distillation. CASRP Journal of Applied Sciences, 1(1), 33–52.
Ukpaka, C. P., Farrow, T. S., & Onu, H. (2015). Development of mathematical model to control the distillate and reflux ratio of a distillation column using ramp input application of response. International Journal of Novel Research in Engineering & Pharmaceutical Sciences, 2(4), 1–23.
